产品展示/PRODUCTS SHOW
ROHS指令分析仪
分享到：
详细信息
产品简介
ROHS指令分析仪EDX9000不仅继承了天瑞仪器EDX系列、快速、无损、直观及环保五大特点，采用分析仪器行业的速探测器技术（SDD）可将测试时间降低到1。同时EDX 9000ROHS指令分析仪还采用了天瑞仪器利产品精密的定位系统，可实现图像联动控制，多点连续测试。新增加电动开发的样品腔使操作更加方便，新设计自动样品平台让检测得到。
ROHS指令分析仪EDX9000不仅继承了天瑞仪器EDX系列、快速、无损、直观及环保五大特点，采用分析仪器行业的速探测器技术（SDD）可将测试时间降低到1。同时EDX 9000ROHS指令分析仪还采用了天瑞仪器利产品精密的定位系统，可实现图像联动控制，多点连续测试。新增加电动开发的样品腔使操作更加方便，新设计自动样品平台让检测得到。
ROHS指令分析仪测量元素范围 ：硫（S）～铀（U）
测量时间：1s或以上
检出限：分析检出限可达2ppm，薄可测试0.005μm
含量范围：2ppm～99.9%
稳定性：0.02%
管压：5～50KV
管流：≤1000uA
探测器：SDD探测器，分辨率可达125eV
准直器：8种准直器自动切换
滤光片：4种滤光片自由切换
样品观察：高清工业摄像头
环境湿度：≤70%
环境温度：15℃～30℃
电源：交流220V±5V（建议配置交流净化稳压电源）
产品优势
产品优势
快—1钟出结果
采用行业的速探测器技术——（SDD）分辨率低至125eV
优势：探测面积大（面积达25mm2）、单位时间内接受信息多、计数率高分辨率好，探测效率更高，探测信噪比更强，检出限更低
采用行业的数字多道技术
优势：提高输出效率，实现超高计数率，采集计数率高可达600KCPS
采用大功率X光管及的准直滤光系统
优势：激发效率更高
光闸系统
优势：样品更换无需关闭高压，提高测试效率与测试精度
精密的定位系统
超高清晰工业摄像头，更清晰的显示测试点
多点测试
2D自动移动样品台——可实现图像联动控制，多点连续测试
超小样品检测——小可测到0.2毫米
8种准直器、4种滤光片快速切换功能，可根据不同样品进行选择
准直器小可达0.2毫米，针对超小样品可聚焦检测
人性化的设计
更安：X射线联动安装置——光闸与联动装置互动；仪器外壳与高压使能端相联动
更快捷：多点测试，点哪测哪
预约预热：根据设定时间，仪器可定时开始测试
预约开机预热功能：客户可预约仪器开机时间，同时可以仪器预热并自动检测、校正仪器状态；同时可以实现预约关机，
关机可设定声光提示
更的检测结果是天瑞人坚持不懈的追求，同时天瑞人还时刻牢记为客户提供更的服务。新开发研制的EDX 9000ROHS指令分析仪正是秉承了这理念。它不仅继承了天瑞仪器EDX系列、快速、无损、直观及环保五大特点，采用分析仪器行业的速探测器技术（SDD）可将测试时间降低到1。同时EDX 9000还采用了天瑞仪器利产品精密的定位系统，可实现图像联动控制，多点连续测试。新增加电动开发的样品腔使操作更加方便，新设计自动样品平台让检测得到。
More accurate test result is the unremitting pursuit of Skyray; meanwhile, we constantly bear in mind to provide customers with superior service. The newly developed EDX 9000 exactly upholds the concept. It not only inherits the merits of Skyray EDX series, but also adopts the most advanced detection technology (X-SDD), which reduces test time to only 1 second. In addition, EDX 9000 also introduces Skyray patented product – precise positioning system, which can realize image coordinated control, multi-point continuous test. The new electric sample chamber makes operation easier, ａnd the new designed automatic sample platform guarantees accurate detection.
Performance characteristics
RAPID, PRESENT TEST RESULTS IN 1 SECOND!
1.The most advanced detection technology — Silicon Drift Detector（SDD）, with resolution as low as 125eV
Advantage: large detecting area (25mm2); receiving more information in unit time; better ｃount rate ａnd resolution; higher precious metal detection efficiency; better SNR ａnd lower detection limit
2.The most advanced digital multichannel technology
Advantage: effectively improve output efficiency, realize ultra high counting rate, guarantee effective counting rate higher than 300KCPS
3.Large power X ray tube ａnd sophisticated collimation filter system
Advantage: higher excitation efficiency for precious metals
4.Optical shutter system
Advantage: no need to close high voltage when replacing sample; improve test efficiency ａnd accuracy
Fine positioning system
Ultra-HD industrial camera shows test points more clearly
Multi-point test
2D movable sample platform – supports image coordinated control, multi-point continuous test
Tiny sample detection – minimum 0.2mm
8 collimators ａnd 4 filters provide free selection according to different sample
The smallest 0.2 mm collimator allows detecting tiny sample
It identifies 99.9% ａnd 99.99% pure gold effectively
It can detect hazardous elements in precious metals like Pb, Cd
Humanized Design
Safer: X-ray integrated safety device — optical shutter interacts with interlock; housing is linked with high voltage enable terminal
Faster: multipoint test, to test the clicking point
Preset test: it can start test at fixed time based on time setting
Preset preheating after starting up: customers can preset time of auto start. At the same time, preheating, automatic check, correction can be done automatically. You can also preset time of auto s ａnd set sound ａnd light alarm before s.
Application Field
RoHS testing
Mining ａnd alloy (Cu, stainless steel ａnd so on) componential analysis
Measurement of plating thickness, measurement of electroplate liquid ａnd plating content
The content test of precious metal such as gold, platinum ａnd silver ａnd different kinds of jewelry
Mainly applied in RoHS directive industries, precious metals ａnd jewelries processing industries; banks, jewelry shops ａnd test institutes; electroplating industries
Technical Parameters
Analytical range: from S to U
Stability (RSD): 0.02%
Detector: X-Silicon Drift Detector (X-SDD)
Resolution: ≤ 135eV
Tube current: ≤1000uA
Tube voltage: 5～50kV
Measuring time: 1s (default)
Filter: 4 filters
Collimator: 8 collimators
Sample observation: HD industrial camera
Humidity: ≤70%
Temperature: 15℃～30℃
Input voltage: AC 220V±5V (suggest to use AC stabilizer)
Configuration
X-Silicon Drift Detector (X-SDD)
Digital multichannel analytic system
X ray source
High ａnd low voltage power supply
Collimation filter system
Precise sample platform
Optical shutter system
Sample observation system
Electronic control system
PC ａnd ink-jet printer
原创作者：江苏天瑞仪器股份有限公司.
在线留言/MESSAGE
在线咨询，尊敬的客户您好，我们会尽快回复您的咨询！
| 您感兴趣的产品* | 您还没有输入您感兴趣的产品 | |
| 您的单位* | 您还没有输入您的单位 | |
| 联系人* | 您还没有输入联系人 | |
| 联系电话* | 您还没有输入联系电话 | |
| 详细地址 | ||
| 常用邮箱* | 您输入的邮箱格式不正确 | |
| 请输入您对我们的意见或建议* | 您还没有输入您对我们的意见或建议 | |
| 验证码* | 您还没有输入验证码 |
温馨提示
1.遵守中华人民共和国有关法律、法规，尊重网上道德，承担一切因您的行为而直接或间接引起的法律责任。
2.请您真实的反映产品的情况,不要捏造、诬蔑、造谣。如对产品有任何疑问,也可以留言咨询。
3.未经本站同意，任何人不得利用本留言簿发布个人或团体的具有广告性质的信息或类似言论。
相关文章/ARTICLES
联系我们/CONTACT US
联系人：王经理
电 话：0512-50355615
手 机：15151668829
地 址：江苏苏州市昆山市玉山镇中华园西路1888号
邮 编：215300
传 真：0512-50355615
邮 箱：2661481387@qq.com
产品分类/CLASS
X射线镀层测厚仪
- 凹槽镀金膜厚仪
- X射线光谱测厚仪
- 汽车配件镀层测厚仪
- 铜上镀银X射线无损测厚仪
- LED支架镀层测厚仪
- X射线荧光无损电镀层膜厚测量测厚仪
- X射线镀锌层测厚仪
- x射线锌镍合金测厚仪
- 电镀XRF镀层测厚仪
- X荧光镀层分析仪
- 金属件镀层测厚仪
- 紧固件电镀镀层厚度检测仪器
- X射线镀金测厚仪
- 无损多层镀层测厚仪
- 电镀金镍测厚仪
- 金属镀层厚度检测仪
- ABS塑料镀铜镍金测厚仪
- 镀铜镍锌测厚仪
- x光镀层检测仪
- 磁性材料电镀层测厚仪
- 电镀层测厚仪
- 镀金层测厚仪
- 镀银层测厚仪
- 镀镍层测厚仪
- 镀锡层测厚仪
- X射线金属镀层测厚仪
- x荧光镀层测厚仪
- X荧光测厚仪
- 黄铜镀镍测厚仪
- X射线无损测厚仪
- X-RAY镀层测厚仪
- 镀银无损测厚仪
- x光镀层测厚仪
- x射线荧光镀层测厚仪
- x射线电镀测厚仪
- 铜排镀锡层测厚仪
- 电镀膜厚测试仪
- 表面镀层测厚仪
- 金属镀层测厚仪
- XRF镀层测厚仪
- x射线荧光测厚仪
- 光谱镀层测厚仪
总访问量：2151232 
天瑞仪器
